fbpx

Arborwood
A Dry Cast Slab with a Wet Cast Look

Arborwood recreates the look of Barkman’s popular Bridgewood wet cast slabs using the dry cast manufacturing process. The result is a more economical, wood-textured slab modelled after rough wood planks. Unlike traditional wood surfaces, Arborwood will never rot or warp and is easier to care for over time. Arborwood is ideal for residential applications like pool decks, paths and patios.

When installing Arborwood slabs, make sure to include a 2-5mm gap between each slab. This will provide enough room for the jointing sand and make installation easier.

Sizes (L X W X H)

Timberwolf_Single_Piece

31.5 X 7.87 X 2.36 IN
800 X 200 X 60 MM

Colours

Arborwood Patio Kodiak Brown

Kodiak Brown

Arborwood Patio Timber Wolf Grey

Timber Wolf Grey

COLOURS SHOWN MAY VARY
Every effort has been made to ensure accuracy in the colour representations found on this website. However, due to the natural characteristics of concrete, the manufacturing process and on-screen display, actual colours in the final product may vary from that shown.

Patterns

1/2 Offset

Pieces per 100 Sqft

59 pieces Arborwood = 100% of total area


1/4 Offset

Pieces per 100 Sqft

59 pieces Arborwood = 100% of total area


Herringbone

Pieces per 100 Sqft

59 pieces Arborwood = 100% of total area


Specifications

DescriptionDimensionsUnit Size MMUnit Size INUnit Face Area M2Unit Face Area Sq FtUnit Weight LBNo. of Horizontal LayersPallet UnitsPallet Face Area M2Pallet Face Area Sq FtPallet Weight LB
Arborwood L X W X H 800 x 200 x 60 31.5 x 7.87 x 2.36 0.16 1.72 48.83 10 50 86.11 2441 
ColoursItem No.
Kodiak Brown 138915 
Timber Wolf Grey 138916 

Applications

Pedestrian Application Icon

Pedestrian

Product Notes

Pallet Information

Available to order in full pallets only. A $35.00 returnable pallet fee will be charged to any bundle of Arborwood. 

Unit of Measure

The Unit of Measure for Arborwood is Each.

Order Considerations

Contact your local Barkman sales representative for information on special or custom order products in terms of minimum production cycles required. 

Installation

When installing this product, make sure to include a 2-5mm gap between each unit. This will provide enough room for the jointing sand and make installation easier.